Home > Hp Officejet > Hp Officejet J6480 Paper Jam

Hp Officejet J6480 Paper Jam

Contents

Find Solutions, ask questions, and share advice with other HP product owners. Step two: Print a self-test report Use these steps to print a self-test report. Make sure that the stack of paper contains no fewer than 10 sheets and no more than 25 sheets of paper. Use the pull tab to remove the plastic tape. http://technewsonline.net/hp-officejet/hp-officejet-j6480-all-in-one-wireless-setup.html

Solution two: Check the cartridges Follow these steps to check the cartridges. Try to print a self-test report. Avoid printing on paper that is dusty. Solution six: Search for more information If you are still experiencing issues, see the HP Product Support Home Page, and then search for another document that relates to the symptoms you

Hp Officejet J6480 Paper Jam

Visit now Z7_3054ICK0KGTE30AQO5O3KA30H4 hp-feedback-banner-portlet Actions ${title} Loading... Figure : Close the cartridge door Reconnect the power cord to the back of the product. To replace the tri-color cartridge, remove the cartridge from the slot on the left. Do not push the guide in so tightly that it binds against the paper.

  1. With the product turned on, disconnect the power cord from the rear of the product.
  2. Search all support All Support Software, Drivers and Updates Troubleshooting How to Product Information User Guides Cancel Example: “Laserjet P1102w driver” or “HP Pavilion 17-f002na will not turn on” Loading Results
  3. Figure : Load plain paper Slide the paper width guide inward until it stops at the edge of the paper.
  4. If the product does not turn on by itself, press the Power button () to turn it on.
  5. Use a flashlight to view the mechanism inside the tray to make sure that nothing blocks the paper from engaging with the rollers.
  6. With replies like this from an HP employee, it shows what a battle we have to fix their garbage.
  7. Rod Eslinger 44,523 views 3:24 How to scrap ink and toner cartridges for gold recovery and cash! - Duration: 4:30.
  8. We'll never spam you!Sign UpCancelBy signing up or using the Techwalla services you agree to the Techwalla Terms of Use and Privacy PolicySign UpLog InWe'll send you an email to reset
  9. Press OK.
  10. The Print window opens.

Press Setup on the product control panel. Continue to the next step regardless. The model shown is HP ENVY 100 e-All-in-One Printer (D410a). 1:23 Printing a Test Page - HP Deskjet D1500 Printer Learn how to print a test page from the HP Deskjet Step one: Reset the printer Press the Power button () to turn on the product.

HP Officejet J6400 All-in-One Printer Series - 'Out of Paper' Error Message and the Printer Does Not Pick Up or Feed Paper Issue The product does not pick up or feed Hp Officejet J6480 Error Alignment Failed Recycle or discard the page. Step two: Clean the rollers in the duplexer Press in the tabs on the top of the duplexer to open the duplexer. http://support.hp.com/us-en/document/c02035105 How does HP install software and gather data?

Reconnect the power cord to the rear of the product. Make sure the HP product supports the paper type. Reload paper that has been in the photo tray for a time. Press the Right Arrow button () to select Tools, and then select Align Print Cartridge.

Hp Officejet J6480 Error Alignment Failed

Paper was added to a stack already in the tray while the HP product was printing. http://h30434.www3.hp.com/t5/Inkjet-Printing/HP-OfficeJet-J6480-false-paper-jam-error/td-p/12759 Look at the estimated ink levels on the Home screen of the printer control panel. Hp Officejet J6480 Paper Jam To print a self-test report, use the steps in the following table. If not, you will need to buy a new color ink unit at any office supply store.References & ResourcesHP: Resolving the Error Message "Incorrect Color Cartridge Installation"Related10 Tips to Photograph the

caution: Carefully remove paper from the front of the product. http://technewsonline.net/hp-officejet/hp-officejet-6500-paper-feed-rollers-not-turning.html Figure : Clean the carriage contacts inside the product Hold the cartridge with the HP logo on top, and then insert the cartridge back into the carriage slot. Figure : Remove the rear access door To remove the duplexer: Press in the buttons on the sides of the duplexer, and then pull the duplexer toward you. Refer to the steps on how to print a self-test report at the top of this document.

Press the right arrow () to select Print Report, and then press OK. If the product is turned off, the product does not release the cartridges. Remove the rear access door or the two-sided printing accessory (duplexer) from the rear of the product. navigate here The model shown is the HP PSC 1210 All-in-One Printer. 1:27 Printing a Test Page - HP Officejet Pro 8500 Premier All-in-One Printer (A909n) Learn how to print a test page

If the issue persists, continue to the next solution. The page should have no steaks, blurs, or missing patterns. Figure : Lift the cartridge access door note: The carriage might try to move into the access area.

Use the right arrow () to highlight Self-Test Report, and then press OK.

If you completed all the preceding steps and your product still has an issue, service the product. Press the Power button () to turn off the product. If the issue persists, continue with the next solution. Remove the cartridge.Step 2Place the ink cartridge back in the carriage.

Z7_M0I02JG0KONJ30ACBBF8MM1084 hp-hero-support-search Actions ${title} Loading... Turn on the printer.Step 4Print a test page. Follow these steps to reset the HP product, which will clear a false paper jam error. his comment is here Before loading paper in the tray, hold the stack of paper, and then tap the bottom edge on a flat surface so that the stack is even on all sides.

Depending on the software program, the button might be Properties, Options, Printer Setup, Printer, or Preferences.