Hp Laserjet 5100 Troubleshooting
Also make sure that the cable is situated away from the registration assembly. Page 202 2. Toner is a powdery substance made of black plastic resin bound to iron particles, which is uniformly attracted to the magnetic core of the cylinder. What to do:First of all try resetting the printer by turning it on and off. http://technewsonline.net/hp-laserjet/hp-laserjet-5l-troubleshooting.html
When the printer turns on, the CPU on the dc controller PCA initially causes the fan motor to run for one-half second. The user can send the command from the control panel to print or delete these jobs. Page 141: Formatter Assembly Print a menu map and a configuration page, if possible, to use as a reference when you reinstall the new formatter. Note Make sure that the tray indicator operates correctly. read review
It is very common on this model to see the rollers & separation pads wear out, even before the fuser fails. If an installed device is not shown, reseat the device and print a new configuration page. Figure 104. Do you wish to proceed to the home page of the new product?
To print rotated paper, see the user’s guide. After the writing process, the drum surface has an invisible (latent) electrostatic image. Printer controller assembly ........ The following steps comprise the adjustment procedure: After you set the VR401 on the paper-handling PCA to the center position (+/-0), place letter- or A4-sized paper in the tray.
Page 16 Table 54. Page 63: Serial Number Turn the printer on. Select Yes to proceed to the matching product information page or No to return to the product you selected. © Copyright 2016 HP Development Company, L.P. http://support.hp.com/us-en/product/hp-laserjet-5100-printer-series/74341/troubleshooting Remove the switch rod (callout 1) by flexing it slightly and unhooking it from the switches on each end.
Press the Tray 1 guide (callout 3) against the printer. Remove the cover. Download or delete files from HP Jetdirect, and download or delete fonts. (See the printer software help for more information.) The EIO disk is protected, and no new files can be Avoid contact with the edges.
- Page 133: Paper-handling Pca Remove the top cover (see page 115) and the left side cover (page 123).
- Page 47: Control Panel Menus Settings in the printer driver and software application override control panel settings. (Software application settings override printer-driver settings.) If you cannot gain access to a menu
- Figure 89.
- Configuration menu Item Q1860-90918 www.GovTechMedia.com Values Explanation Set the printer to change to PowerSave mode after it has been idle for a specified amount of time.
- If this doesn't work remove and reinstall the cartridge or replace it.
- Page 179: Left Front Corner Cover Installation Left front corner cover installation Install the tray indicator assembly.
- Chapter 7 Troubleshooting 201...
Do not print on both sides of vellum. CAUTION Performing a cold reset resets the Jetdirect and other EIO configurations. You can lose buffered page data or printer configuration settings when you select these items. navigate here Page 12 Figure 53.
Share: HP Printer Repairs Part of Teffont Bussiness Systems Limited Call us free to get a quote 0800 324 3212 Home Mono LaserJet Colour LaserJet DesignJet Error Codes The Team About Page 170: Optional 250-sheet Feeder, Separation Pad Optional 250-sheet feeder Separation pad Empty the paper from the tray. While pressing Expected life of components The following table shows the expected life of certain components in the printer.
Page 127 Tray 1 inner cover removal (2 of 2, front of printer) Facing the front of the printer, slip the cover off of the locator pins by tilting it to
In the duplexer, the reversing roller switches the feeding direction of the paper. The system returned: (22) Invalid argument The remote host or network may be down. Figure 48. Observe the warning and caution below.
all the connections are well connected and everything looks right... Recent products: HP LaserJet 5100 Printer series Most viewed solutions Help Other Knowledge Base options Search HP Support Center Top issues Advisories, bulletins & notices Manuals Troubleshoot a problem Setup & Rear door and rear output bin removal (1 of 2) The plastic support strap is located on the left side of the printer. http://technewsonline.net/hp-laserjet/hp-laserjet-4250-troubleshooting.html Troubleshoot a problem Software and drivers (24) Windows (12) Macintosh (11) Other (Unix, Linux, Novell, etc.) (1) Installation and configuration issues (8) Printing (2) Windows (5) Network and wireless (1) Network
They are common to both the paper-feed roller assembly and the registration assembly.