Home > Hp Laserjet > Hp Laserjet 4250 Error 13.20.00 Jam In Tray 2

Hp Laserjet 4250 Error 13.20.00 Jam In Tray 2

Contents

The part numbers are: WG8-5362-000 (HP 4200/4300) WG8-5624-000 (HP 4250/4350) If this does not take care of the problem, you will be looking at replacing the DC Controller. You confused me by calling it Formatter PCA. Action NOTE: Press the ? (help) button for detailed information about clearing the jam. When you see this 13.20.00 error, you should verify you have the correct fuser installed for your model.  HP makes 3 different fusers which look identical, but the 3 fusers are http://technewsonline.net/hp-laserjet/hp-laserjet-4250-error-codes.html

I have over 4,000 pages now without a problem on the printers the older image was installed on. i got the same error as the guy above. Figure 1: Opening top cover and removing print cartridge Use the green handle to lift the paper-access plate. top 13.98.00 OPEN INPUT TRAYS THEN OPEN AND CLOSE TOP COVER Description The rear output bin was opened when the printer was attempting to send a page to the duplexer, a http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-bpl12422

Hp Laserjet 4250 Error 13.20.00 Jam In Tray 2

CAUTION: To prevent damage to the print cartridge, do not expose it to light for more than a few minutes. top 13.02, 13.05, 13.20, 13.21 JAM IN TOP COVER AREA Description Paper jam in the top-cover area. compu85 6,077 views 4:51 HP 4200 4250 4300 4350 13.20 error on startup fix - Duration: 1:44. BrokenPrinter1 47,850 views 11:30 HP LaserJet 4000 4050 13.2 Paper Jam Tray adjustment - Duration: 4:51.

Then, reinstall it. If the printer is already plugged into a wall outlet, try another power source in the building that is independent of the one currently being used. top 68.X PERMANENT STORAGE ERROR For help press ? 13.20.00 Jam In Tray 2 Hp 4015 If the accessory uses cables, disconnect and reconnect them.

If the error persists, replace the stapler cartridge. by Anonymous on Apr 28, 2008 at 10:32am Add comment Please sign in to comment 0 I powered off the printer then cleared the print buffer after powering it back on BUT, I certainly would not put any guarantees on it.Good luck everyone. http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=85754&docId=emr_na-c00633921&docLocale=en_US An improper communications protocol might be in use.

If that document is still in the que, it will try to print again giving us the error yet again so we have to clear the que before/during the power off/on. Hp Laserjet 4200 Cartridge Installed Message If a jam message persists, it is possible that paper is still jammed in the printer. NOTE: For more information and troubleshooting steps, refer to the document HP Jetdirect Print Servers - 80, 81,82, 86, and 87 Service Errors (bpj05423). For HP Laserjet 4200/4300 Series printers: Hold down SELECT, and then turn the printer power on.4.

Hp Laserjet 4250 Error Codes

This causes static electricity, which can cause paper jams. Press the (Up Arrow) and (Down Arrow) buttons to step through the instructions and/or refer to the following steps. Hp Laserjet 4250 Error 13.20.00 Jam In Tray 2 I may be wrong on this and do not have my documentatin with me so if I am just disregard. Hp Laserjet 4200 Error Codes Troubleshoot a problem Software and drivers (28) Windows (15) Macintosh (11) Other (Unix, Linux, Novell, etc.) (2) Installation and configuration issues (8) Printing (2) Windows (5) Network and wireless (1) Network

The JOB setting determines that the clearable warning message appears until the end of the job that generated the message. his comment is here Action NOTE: Press the ? (Help) button for detailed information about clearing the jam. Category Howto & Style License Standard YouTube License Show more Show less Loading... The EIO accessory might be defective. Hp Laserjet 4250 Error 13.01.00 Jam In Tray 2

  • Sign in 310 11 Don't like this video?
  • some time it giving junk printouts.i couldnt send prints that time.
  • Push up on the paper present sensor flag and the lifter motor should stop running.
  • Push the blue levers upward and pull the fuser straight out of the printer.
  • Figure 46: Pulling the cover on the right side of the printer Remove the cover from the printer.
  • Figure 47: Removing the cover Open the DIMM-access door by pulling on the metal tab.
  • Pressing the Select (check) button should clear the message.

Figure 48: Opening DIMM access door Remove the DIMM from the antistatic package. Make sure that the tray is fully inserted into the printer and is not overfilled. If you are printing from Tray 1, verify that the correct paper size is selected at the printer control panel. http://technewsonline.net/hp-laserjet/hp-laserjet-4250-troubleshooting.html Figure 16: Opening Tray 1 and removing entrance cover Rotate the paper guide to check for additional jammed paper underneath.

Just take off printer, unplug cable from the hard drive, as well as the connection to the printer, and plug all back in. 13.20.00 Jam Inside Rear Door Turn the printer off and then turn the printer power on. top 50.4 FUSER ERROR Description The problem exists with the customer’s line voltage.

Stay tuned for more Tech Tips.

They change as the state of the printer changes. If the above action does not solve the issue, contact HP or authorized service provider. I attempted to reset the JetDirect but had no luck (but I do not have any prior experience in that department, so I just followed the instructions). Hp Laserjet 4200 And 4300 Series Printers Drivers Figure 9: Removing the jammed paper Make sure that the paper is flat in the tray at all four corners and below the maximum-height indicators.

Also if the 4200 is like the color laserjet 4600 the only difference between the duplex unit and the simplex is the dc controller. Slide the tray out of the printer, and remove any damaged paper from the tray. MaintenanceKits 25,692 views 7:14 How to fix 13.02 and 13.03 Paper jam Errors; HP laser Jet P3015 Series Printer - Duration: 9:08. navigate here If necessary, lift the black plastic guide that is located on the top of the fuser to gain access to the jammed paper.

Warranty status:Unspecified Check warranty status Enter product serial number The serial number you entered,, matches a different product than the current product. I was refurbishing a machine and ran 50 sheets from tray 2 no problem and then i decided to test tray 1. Click here for instructions on how to print a Configuration page. Description A stacker or stapler/stacker error has occurred.

fastprintersdotcom 96,803 views 4:28 Renew your printer pickup roller!