Home > Hp Deskjet > Hp Deskjet 610c Error

Hp Deskjet 610c Error

Press the Power button to turn on the printer, if it is not already turned on. Reconnect and turn on and see what happens. Repeat the steps for each cartridge. If the printer does not print a test page, there is an issue with the printer hardware. http://technewsonline.net/hp-deskjet/hp-deskjet-4255-error.html

Figure 1: Control Panel 1 - Power button 2 - Scan button 3 - Cancel button 4 - Fit to page button 5 - Fit to page light 6 - Black Clear any obstructions that you find. If this happens, press and quickly release the Power button again. Open the cartridge access door. try here

Figure 27: Number on the cartridge label 1 - Cartridge numbers Make a note of the cartridge number printed on the label of each cartridge, and then close the cartridge access Touching these parts can result in clogs, ink failure, and bad electrical connections. Press and hold the Start Copy Black button () and the Start Copy Color button () until the printer makes some noise. You can also purchase genuine HP cartridges from other retailers.

  1. If these steps resolved the issue, and the test page prints, there is no need to continue troubleshooting.
  2. If any torn pieces of paper remain inside the product, more paper jams are likely to occur.
  3. Go to HP SureSupply .
  4. Press the Power button () to turn off the product.

If the carriage is stuck in the middle of the product, move the carriage to the right side of the product. How to print a test page Load letter, A4, or legal unused plain white paper into the input tray. Power light: Breathing Attention light: Off Color ink level icon: Off Black ink level icon: Off Ink error indicator: Off Media error indicator: Off Segment display counter: Off Figure 5: Control Figure 72: Press in tabs and open the cleanout door Gently remove any jammed paper from inside the product.

If the test page does not print, continue with the next solution. If the product does not turn on by itself, press the Power button () to turn it on. Step 2: Print a test page Print a test page to make sure that the hardware functions correctly. Go Here Solution two: Clear any jammed paper Jammed paper can cause the carriage to stall.

NOTE: You can also open the HP software by clicking or tapping the printer's icon on the desktop (). WARNING: Do not force an incompatible power cord (its plug has a different shape or size than the HP printer's electrical connection) into an HP printer. Windows Vista Click Start (), click Programs, click HP, click the folder for your HP printer, and then click the icon for your HP printer (). Open the cartridge access door.

Reattach the cleanout door. If the issue persists, continue to the next solution. Solution two: Remove, inspect, and clean the problem cartridge Follow these steps in the order given to clean the electrical contacts. Press and hold the Start Copy Black button () and the Start Copy Color button () until the printer makes some noise.

Lift the scanner lid. http://technewsonline.net/hp-deskjet/hp-deskjet-710c-error.html The printer lights might flash and the carriage might move. Wait until the printer is idle and silent before you continue. If any torn pieces of paper remain inside the product, more paper jams are likely to occur.

Solution two: Reset the All-in-One Follow these steps to reset the printer. No, create an account now. Privacy Policy Terms of Use Log in or Sign up Printer Forums Forums > Manufacturers > Hewlett Packard > HP DeskJet 610C - Error in printing Discussion in 'Hewlett Packard' started this contact form Solutions If one (or both) of the cartridges is low on ink, you do not need to replace the cartridges yet, unless you are dissatisfied with the print quality.

NOTE: To make sure that your printer and power supply are compatible, HP suggests you use the original power supply shipped with your printer. The tri-color cartridge goes in the slot on the left The black cartridge goes in the slot on the right Figure 82: Insert the cartridge Push the cartridge forward into its NOTE: The printer might go through a warm-up period.

See the engraved guide next to the scanner glass for help loading the alignment page.

Figure 4: Reconnect the power cords 1 - Rear of printer 2 - Power module 3 - Electrical outlet Check to see if the power module has an LED light. Get Macromedia Flash now. Press down on one of the cartridges to release it, and then pull it out from its slot. The test page prints.

Wait at least 15 seconds. Disconnect the power cord from the rear of the product if it is not already disconnected. Experiencing another issue? http://technewsonline.net/hp-deskjet/hp-deskjet-f4180-e-error.html Make sure that they match the icons for the slots they're installed in.

Clean the contacts in the carriage for the problem cartridge. Step 1: I clicked Start and then Control Panel, click on “View By: Large icons” and then "Administrative Tools".