Home > Hp Color > Hp Color Laserjet 3600n Error 59.30

Hp Color Laserjet 3600n Error 59.30

The drive gears might be damaged. Press OK to clear the message. An error occurred with the magenta print- cartridge drive motor during startup or rotation. New service manuals Samsung ProXpress M4025ND, (sm, pc), Eng, 26.8Mb Samsung SLM3825ND, (sm, pc), Eng, 26.8Mb HP LaserJet Pro M403, (stm), Eng, 4.87Mb Canon imageRUNNER Advance C5560i, (sm, pc), Eng, 95.2Mb Check This Out

Remove all the print cartridges and check for orange shipping locks at each end of each cartridge. Reduce the complexity of the print job to avoid this error. Add × Loading... Recommended action 57.04 Error: 1.

Device error Press OK A beam-detect error has occurred. Open the front door and clear the jam. Replace the driver PCA. 59.53 Error 59.63 Error An error occurred with the yellow print-cartridge drive motor during startup or rotation. Printing will not continue until the cartridge is replaced.

Print-quality problems might occur. Turn off the printer. Video Photos Link Add Upload Upload × × Draw a box over the problem!! Press to select DIAGNOSTICS.4.

Select the component test options when prompted by the printer.Menus cannot be opened during component tests, so serves the same function as the Stop button.● Fuser  motor. Replace the low-voltage power-supply PCA. The fans are running but none of the motors drive when it goes through it's initialization sequence. Thank you!

Reply Reply With Quote Quick Navigation HP Top Site Areas Settings Private Messages Subscriptions Who's Online Search Forums Forums Home Forums Tips Tips Industry Issues Industry Issues Manufacturer Discussions Managed Turn the printer off and then on. Replace the connector as necessary. If you are even remotely interested, feel free to shoot me an e-mail.Leave a Reply Cancel reply Your CommentYou may use these HTML tags and attributes:

Print-quality problems that are related to the environmentpage 226................................................................................................................................................................ http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c00784943 About Advertising Privacy Terms Help Sitemap × Join millions of IT pros like you Log in to Spiceworks Reset community password Agree to Terms of Service Connect with Or Sign up The gear in the back is for the pressure release mechanism,  it should be hard to move and   is cammed so if you move it, it probably will slam the Adding memory to the printer might accommodate printing of more complex pages.

Replace the DC controller PCA. his comment is here Kevin Find well displayed printer parts diagrams at: http://www.printerworks.com/ Share this:TweetShare on TumblrPrintRelated posts:50.7 Fuser Error - HP Color Laserjet 3000, 3600, 3800, and CP3505 50.2 Fuser Error HP Color Laserjet Ensure that all trays are configured correctly before printing again. Replace the memory tag PCA.

Tray 1 Reconnect the following connectors: Relay PCA: J7003 and J7001 DC controller: J1014 Replace the tray 1 paper sensor. Release the hinge for the top cover using a flat blade screwdriver, Using a flat blade screwdriver release the two tabs on the right and left side and the three tabs Replace the cyan print-cartridge drive motor.59.52 and 59.62. this contact form Check that connectors J5006 on the black print-cartridge drive motor and J208 on the driver PCA are seated correctly. 2.

Any button press or data received clears the sleep mode. then the unit may need a motor or board. Check that the following connectors on the driver PCA are seated correctly: J403, J405, J213.

Replace cartridge The print cartridge has reached its end of life.

Nov 03, 2009 | HP LaserJet 3600n Printer 1 Answer MY HP LASERJET 360ON HAS ERROR MESSAGE the memory is a 3-5 inch rectangle shape with black rectangle chips on it. Manual feed , alternates with Press OK for available media No media is in the multipurpose tray, and a print job requires a specific type and size that is available A problem with the Yellow Print cart. Tray 2 Reconnect the following connectors: Driver PCA: J210 and J201 DC controller: J1022 Replace the driver PCA.

Parts are thoroughly tested, inspected for damage & defects and guaranteed 100% fully functional. $229.00 Call for Assistance 877-755-5300 Home About Us Contact Us Search Site Map Printers Supplies Accessories Parts HP - Updating Drivers As soon as you purchase a new HP Cp1215 Color LaserJet Printer, those hardware drivers that were included with it are already in need of an update! I'll give the component tests a go tomorrow. http://technewsonline.net/hp-color/hp-color-laserjet-3600n-error-10-92-00.html Open the Print quality menu and set Restrict color to Enable color.

Turn off the printer. Create your Spare Parts List. HP CLJ 4700/4730/CP4005 Fuser Roller Drive Assembly RM1-1729-ROConclusion About The 59.30 Fuser Error on Your HP Color Laserjet 4700, 4730, CP4005Not a bad job. Measure the resistance between fuser connectors J6007LA-2 and J6007LA-3.

Repetitive-defects troubleshootingpage 237................................................................................................................................................................ TECHNOLOGY IN THIS DISCUSSION Join the Community! Replace the DC controller PCA if necessary. 49 Error Turn off then on A critical firmware error has occurred. Open the front door and top cover and clear the jam.

Tip: The max point reward for answering a question is 15. The fuser  and main motor turned with little resistance but failed the fuser motor test.Fuser Motor Removal on the HP Color Laserjet 47001. Remove all memory DIMMs or third-party DIMMs from the printer. (Do not remove the firmware DIMM in the lower slot J1). Order supplies alternates with Ready More than one supply item is low.

If the resistance is not 100 kohms to 3 Mohms, replace the fuser. Replace the cyan print-cartridge drive motor. 3. Turn off the printer. Reseat the connectors J5008 on the fuser motor and J 213 on the driver PCA.

If the problem persists, replace the fuser. Replace the DC controller PCA. Page too complex Press OK The printer cannot process the page. Turn the printer off and allow it to cool for approximately 10 minutes before removing the fuser. 50.1 Error: Verify the fuser is installed correctly and fully seated.

If the resistance is not 100 kohms to 3 Mohms, replace the fuser. Close the front door.