Home > Hp Color > Hp Color Laserjet 2600n Error 51.22

Hp Color Laserjet 2600n Error 51.22

Status messages The status messages that appear on the Device Status page are the same messages that appear on the HP Color LaserJet 2600n control panel display. The print engine has failed to pick up a piece of media. The printer is waiting for paper in the tray indicated. The supplies gauge will display the consumption levels of print cartridges. http://technewsonline.net/hp-color/hp-color-laserjet-2600n-error-51-23.html

Plug the device directly into the wall socket. Add × Loading... The supplies gauge will display the consumption levels of print cartridges. It's worth a thousand words. news

Z7_M0I02JG0KONJ30ACBBF8MM1084 hp-hero-support-search Actions ${title} Loading... Even after cleaning the scanner lens the print is either still faded on the same color or all colors. When taking it apart the first time for the lens cleaning, the spring probably was removed by accident when I pulled the cables to the side.https://www.flickr.com/photos/blue_metal/9163858322/Found another spring and now the the line is about 1cm ..

  1. Description Idle with no other pending messages.
  2. Control panel The printer contains the following lights and buttons on the control panel: Figure 1: Control Panel Callout Description 1 Color print cartridge indicators 2 Attention light (amber) 3 Ready
  3. error Engine error Invalid driver Invalid entry Critical error messages 50.1 Fuser Error Turn off then on 50.2 Fuser Error Turn off then on 50.3 Fuser Error Turn off then on
  4. Click here to view the document "HP Color LaserJet 2600n - Calibrating the printer" available on the HP Web site at (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c00314525).
  5. Only then, put in the screws and tighten them.
  6. Action Open the door and clear the jam.
  7. Same thing.
  8. Reassembled and recalibrated many times.
  9. If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information.

You can see the faint black lines at the very top of the page and then they disappear later. The actual assemblies are the same part for each color.  The error code meanings are as follows: 51.20 points to the Black laser scanner 51.21 points to the Cyan laser scanner prev next Related Questions: 1 Answer Hp laser jet 300/400 10.1000error 10.10 error means it does not recognize the chip on the cartridge or that the seal is still in cartridge Action The black print cartridge must be replaced before printing can continue.

If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information. If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information. Aug 09, 2010 | HP Color LaserJet 2600n Printer 1 Answer MY HP ''COLOR LASER JET 2600n'' HAS FUOLL INK CARTRIDGES BUT THE PRINTING IS REALLY DULL AND FADED LOOKING. http://h30434.www3.hp.com/t5/LaserJet-Printing/Error-Code-51-22/td-p/55288 The user must acknowledge the message by pressing the SELECT button.

Action This message is a Ready State with Warning error; it does not require the user to take action. If you believe you purchased an HP supply, please call the HP fraud hotline at 1-877-219-3183 or go to the HP anticounterfeit Web site at http://www.hp.com/go/anticounterfeit . A "misuse of HP in OEM E-label field" error is essentially a non-HP cartridge message. I almost gave up & was ready to tell the customer I couldn't fix it.I even figured out what all those numbers in a row at the bottom of the config

Action note: Any printer repair required as a result of using a non-HP or unauthorized supply is not covered under warranty. Continued by PurpleOrange on Nov 29, 2011 at 2:09am Add comment Please sign in to comment No. The device experienced an internal engine error. Incorrect supplies Error message Incorrect supplies Description Multiple print cartridges are incorrectly installed.

Solution is carefully clean the mirrors using isopropanol, remove all plastic grates in front and at the back of the fan and close all fan vents with a tape. his comment is here If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information. If the problem continues, contact HP Customer Support Center for technical assistance at http://www.hp.com/support/clj2600n or see the flyer that came in the printer box for additional contact information. Jul 12, 2008 | HP Color LaserJet 2600n Printer 1 Answer New Black Cartrige plz try with another cartridge Jul 01, 2008 | HP Color LaserJet 2600n Printer 1 Answer Hp

Calibrated etc several times.Help! Reply With Quote 07-13-2010 #2 prntrfxr View Profile View Forum Posts Private Message Dangerous with Tools 1,000+ Posts Join Date Apr 2008 Location Living in Exile Posts 1,670 Post Thanks / under the Magenta print cartridge gas gauge Description The magenta print cartridge or print cartridge e-label is missing. this contact form top Install supplies Error message Install supplies alternates with with a ?

Action Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the device to initialize. Click Start, Programs or All Programs (Microsoft Windows XP or Microsoft Windows Server 2003), HP, HP Color LaserJet 2600n, and then HP Color LaserJet 2600n toolbox from the Microsoft Windows desktop. Control panel message Calibrating...

Inspect the e-label reader to ensure the gold contact points are not damaged or bent.

Action NOTE: Any printer repair required as a result of using a non-HP or unauthorized supply is not covered under warranty.Press the (SELECT) button on the control panel to continue printing. Replace supply. top Unauthorized black Error message Unauthorized black alternates with To accept press Description A new black print cartridge has been installed that is not made by HP and was overridden. Calibrate the printer.

I have a windows 7 operation system so FX toolbox is no longer available to me. top Unauthorized cyan Error message Unauthorized cyan alternates with To accept press Description A new cyan print cartridge has been installed that is not made by HP and was overridden. Use the power switch to turn on the device. http://technewsonline.net/hp-color/hp-color-laserjet-2600n-error-10-0002.html Whatever colors are causing problems need to be replaced to fix the problem Sep 28, 2010 | HP Color LaserJet 2600n Printer 2 Answers My Hp Color laserjet 2605 was not

but same error will you help me plzethanks in advance Reply 0 0 jeffbrom Top Student Posts: 8 Member Since: ‎05-24-2011 Message 5 of 7 (4,512 Views) Report Inappropriate Content Re: Cleaning... Pay close attention to the video where it explains how to properly mount the scanner and it will save you a lot of dismantling. Try and cut corners or cheap out and you will regret it.

Override by pressing the (SELECT) button on the control panel and use the print cartridge.