Home > Error Code > Hp Laptop Error Code List

Hp Laptop Error Code List

Contents

The page containing the error will automatically be reprinted. 2. You can verify this by substituting a known good DC controller if possible. Check PS701 and PS703 13.20/13.32 Paper stopped jam in paper path. Inspect pins on formatter MIO connection. 2. this contact form

You need to check the configuration of your printer and drivers, reset the printer, try issuing an initialization command from within the application. Turn the printer off, and then turn the printer on. 2. IIISi/4Si Only: 1. Error 23 I/O Not Ready ALL PRINTERS The I/O card is not accepting data.

Hp Laptop Error Code List

ERROR 80 80X.YYYY ALL Printers The EIO card in slot X has encountered a critical error -power cycle, reseat card then replace card if needed. Replace the fan. I truly appreciate it. Formatter PCA malfunction. 3.

  • May need to reload your PostScript print driver file.
  • On the 5L, set the Enhanced I/O to AUTO (PCL mode) and resend the print job.
  • Error 21 Print Overrun The print job is to complex.

Temporary printer error, check printer's configuration. 57 ERROR II, IIID Only: 1. 57-1 Error - Incompatible memory card in front slot. 2. 57-2 Error - Incompatible memory card in rear slot. ERROR 40 Make sure computer and printer are set to the same baud rates. is between 2925J00000 to 3047J999999. (2-diode to 3-diode upgrade corrects static caused problem.) IIP, IIP+, IIIP Only: 1. Hp Beam Detect Malfunction II, IID Only: 1. 53 Error - Replace memory card.

If you don't hear the motor immediately and you don't have a paper jam, change the power supply. Inspect PostScript ROMs for bent or broken pins. 2. Check and reseat connectors J4, J5, on the Low Voltage Power Supply, J8, J9, J10 and J15 on DC Control PCA. 2. this content IIISi/4Si Only: 1.

Error 58 4/4L/4P/4V/5/5P Check the fan cable - reseat cable or replace fan 4V/4MV Defective DC controller board - replace IIISi/4Si Error 58.1 & 58.2 Improperly seated paper cassette 4Si/IIISi 58.1/58.2 77d4 Printer Error The chip may be missing or defective or contain incorrect information. May also be formatter. Make sure the paper cassettes are installed correctly and adjustments are set properly.

Hp Printer Error Codes List

Turn the printer off, and then turn the printer on. 2. http://www.printertechs.com/printer-troubleshooting/hp-error-codes Bad registration sensor or bad fuser exit sensor. Hp Laptop Error Code List Power cycle the printer. Hp Inkjet Printer Error Codes Cycle power. 68 COLD RESET 1.

Replace both at same time. http://technewsonline.net/error-code/computer-error-codes-list.html Back back to top How did we do? Inspect Fiber-Optic Cable between Laser/Scanning Assembly and DC Controller. 3. The page containing the error will automatically be reprinted. 1. 41.2 Beam Detect Malfunction

Measure the resistance between the fuser connectors. Replace the laser/scanner. 5. Computer and printer may be set to different baud rates. 2. navigate here Defective fan, PS4 or PS5 4.

Replace toner cartridge. 2. Hp Printer Error 79 Remove optional I/O PCA, then re-test. 69.x SERVICE 4000/4050/4100/5000/8000/8100 1. ERROR 41 Momentary error, press "Continue" or "GO" to reset the printer 5L/6L Power Cycle the printer if error continues reseat the DC controller to Formatter 5P/6P Occurs if printer picks

Reinstall the toner cartridge and close the top cover. 54.4 PRINTER ERROR alternates with CYCLE POWER TO CONTINUE A problem exists with the customer’s line voltage. 1.

Your cache administrator is webmaster. Replace font cartridge. 2. This can happen when printing a FAX document formatted for A4 size paper. Hp Laserjet P3015 Error Codes Check I/O Cable, it could be the wrong cable or damaged.

Turn the printer off, and then turn the printer on. 2. This is the board mounted to the DC power supply which is in the right front corner of the printer. John D. http://technewsonline.net/error-code/oracle-sql-error-codes-list.html See Service Note 33471-01B if Serial No.

Scroll through items until "I/O =" appears and use the +/- key to display parallel and the enter key to select. Replace DC Controller. Remove I/O cables. (Cable is hooked up incorrectly or bad interface in computer.) 2. I/O card is unable to accept data or is not connected to the network. 30 PS ERROR XX 1.